Skip to main content
Return to mackie.com

How Do I Pair or Link My SRM or SRT Speaker with Bluetooth?

  • Updated

Bluetooth Pairing Guide

Follow these steps to pair your phone, tablet, or computer:

  1. Turn on the speaker.

  2. From the on-screen mixer, scroll to the menu at the bottom-right and select it.

  3. Navigate to the BT menu.

  4. Select "Pair" and the screen will show the speaker as "Discoverable."

    • Important: If you mistakenly select "Connect" and the speaker shows as "Searching," cancel the process and perform this step again.

  5. On your device, open your Bluetooth Settings.

  6. Select your speaker (ex: SRM210, SRT212, etc.) to pair.

  7. Open the SRM Connect or SRT Connect app if you want remote control.

Notes

  • If pairing fails, clear the Bluetooth list on your device and retry.

  • Only one device can be paired to a speaker at a time. Do not try to pair two identical speakers to your device. Instead, follow the Bluetooth linking guide below!

Bluetooth Linking Guide

Use this to play the same Bluetooth audio on two SRM or SRT speakers.

  1. Pair your phone/tablet to Speaker A (see pairing guide above).

  2. From Speaker A's on-screen mixer, scroll to the menu at the bottom-right and select it.

  3. Navigate to the BT menu.

  4. Select "Connect" and the screen will show the speaker as "Searching."

    1. Important: If you mistakenly select "Pair" and the speaker shows as "Discoverable," cancel the process and perform this step again.

  5. Repeat this same process for Speaker B.

  6. Open the SRM or SRT Connect 2 app and select the Advanced tab to:

    1. Choose your mode:

      • Stereo – Each speaker plays either the left or right channel

      • Zone – Both speakers play in mono

  7. Return to the home menu and select Config->BT Settings to set up Auto-Connect and Auto-Link settings:

    • Auto-Connect – Upon boot-up, the primary speaker connects to the paired device

    • Auto-Link – Upon boot-up, the primary speaker connects to the secondary speaker

Notes

  • Wireless linking only works between two speakers.

  • Thump speakers may only link to like SRM or SRT speakers (SRM212 + SRM215 or SRT210 + SRT212). You cannot mix-and-match different Mackie speaker product lines via Bluetooth.

For more information or questions about Mackie products, please contact us here.

Related to:

Contact us